Score your samples
Cupping score calculator (SCA-style, 10 attributes)
Score each attribute from 6.00 to 10.00 in 0.25 steps. Enter taint and fault cups to subtract defects. Name up to three samples.
| Attribute |
|---|
Final score = sum of the ten attributes minus defects (taint cups x 2, fault cups x 4).
Taste each sample at the right stages (fragrance dry, aroma wet, then flavour, aftertaste and the rest as the coffee cools), and write the scores in as you go. The ten attributes add up to a maximum of 100 points. Defect cups are deducted from the total.
What each attribute measures
| Attribute | What to look for |
|---|---|
| Fragrance / aroma | Smell of dry grounds and of the wet crust |
| Flavour | Overall taste and aroma while drinking |
| Aftertaste | Length and quality of the finish |
| Acidity | Brightness and quality, not just quantity |
| Body | Weight and texture in the mouth |
| Balance | How well flavour, acidity and body fit together |
| Uniformity | Consistency from cup to cup |
| Clean cup | Absence of off-tastes from first sip to last |
| Sweetness | Perceived sweetness |
| Overall | The taster's overall judgement |
Use the coffee flavor wheel to describe what you taste and the cupping guide for method.
Reading the final score
| Score | Band | Typical use |
|---|---|---|
| 90 and above | Outstanding | Top specialty lots |
| 85–89.99 | Excellent | Premium specialty |
| 80–84.99 | Very good | Specialty-grade |
| Below 80 | Below specialty | Commercial and blending |
Many commercial and Robusta lots will score below 80 on this scale. That does not make them poor value: score against the job the coffee has to do. See Robusta grading and grading standards.
Setting up a fair cupping
- Roast samples consistently. See sample roasting, and rest 8–24 hours before cupping.
- Use the same ratio and water for every cup. About 8.25 g per 150 ml is a commonly used ratio.
- Cup at least five cups per sample to judge uniformity.
- Cup blind where you can, and score before you discuss.
- Print the sheet and score on paper if screens slow you down.
FAQ: Coffee cupping score sheet
What score is specialty coffee?
Coffee scoring 80 or more on the SCA-style 100-point scale is commonly called specialty grade.
How many points is each attribute worth?
Each of the ten attributes is scored out of 10 here, giving a maximum of 100 before defects are deducted.
What is the difference between a taint and a fault?
A taint is a mild off-note (deducted 2 points per cup here), while a fault is a strong off-note that makes the cup unpleasant (4 points per cup). See defect detection.
Do I need to cup five cups per sample?
It is the usual practice, because uniformity and clean cup depend on cup-to-cup consistency. You can still score with fewer cups for quick checks.
Is this the official SCA form?
No. It is an SCA-style calculator for training and quick evaluations. Use the current official SCA protocol for certified scoring.
Can I cup Robusta with this sheet?
You can use it to compare lots, but Robusta is often judged on cleanliness, body and sweetness using other protocols. See fine Robusta explained.
How do I print the sheet?
Press the Print button on the calculator. The page prints only the score sheet.
Where can I get green coffee samples to cup?
Ask Scofi for a sample pack. We share specs and samples, depending on availability.
