Calculate your blend
Blend ratio and cost calculator
The starting numbers are examples only. Replace them with your own blend and supplier quotes.
| Component | Share % | Green price / kg (RM) |
|---|---|---|
Fill in your blend to see how much of each green bean to weigh.
Enter the share of each component (they do not have to total exactly 100: the tool scales them), the green price per kilogram from your quotes, your roast loss and your target roasted weight. The weigh-out list shows how much of each green coffee goes into the roaster across the whole run.
How the maths works
- Blended green cost = sum of (share × price) ÷ total share.
- Cost per roasted kg = blended green cost ÷ (1 − roast loss).
- Green needed = target roasted kg ÷ (1 − roast loss).
- Each component = green needed × its share of the blend.
Get your roast loss from the roast loss calculator or your own roast log.
Example blend structures
| Style | Example split | Why it works |
|---|---|---|
| Balanced house espresso | 70% Arabica, 30% Robusta | Sweetness plus body and crema |
| Strong kopitiam-style | 20% Arabica, 80% Robusta | Bold, bitter, thick body |
| Smooth filter blend | 100% Arabica, two origins | Clean cup, easy to adjust |
| Value everyday blend | 50% Arabica, 50% Robusta | Lower cost with decent body |
See Robusta for espresso blends and Arabica vs Robusta for the flavour logic.
Blend cost versus blend quality
A cheaper blend is not always a better business decision. A small share of a quality Arabica can lift the cup more than its cost suggests, while a poorly graded cheap component can add defects and waste. Compare cost with cup results, and read the house blend guide before you lock in a recipe.
FAQ: Blend ratio and cost calculator
What is the most common coffee blend ratio?
There is no single standard. Espresso blends often use mostly Arabica with a smaller Robusta share for crema and body, while kopitiam-style blends lean heavily on Robusta. Test several ratios by cup.
Do the percentages have to add up to 100?
No. The calculator scales them to 100% for you and tells you when they do not already add up.
Are the prices in the tool real Scofi prices?
No. They are example values for you to replace with your own supplier quotes. Request a quotation for current pricing by specification.
Should I blend before or after roasting?
Pre-roast blending is simpler. Post-roast blending gives more control over each component. See our comparison guide.
Does roast loss differ between blend components?
Often yes. This tool uses one average loss. For a precise figure, log each component's loss and use a weighted average.
How much Robusta should I put in an espresso blend?
Many roasters test between about 10% and 40% by taste and budget. Start small and cup each version. See Robusta for espresso blends.
Can I use more than four beans?
Not in this tool, but four is enough for most blends. Combine minor components or run the calculator twice.
Can Scofi supply both Arabica and Robusta for a blend?
Yes, depending on availability. Tell us the cup you want and we will shortlist green beans and send samples.
